Working Principle Of Paper Pulp Cleaner


The paper pulp slag cleaner is used to remove impurities in the paper pulp. The heavy particles in the slurry rotate outward under the influence of centrifugal force and fall along the inner wall of the paper pulp slag remover. The light impurities concentrate in the center and flow upward under the influence of the slurry flow.

Working Principle Of Paper Pulp Cleaner

The pulp cleaning machine works under a certain pressure difference. And the pressure of waste paper pulp cleaning equipment must be stable. The pressure in the paper pulp cleaner has influence on flow rate,concentration, concentration factor and slag removal efficiency. In order to avoid clogging and unnecessary wear and to achieve good slag removal efficiency, the correct setting of the pressure value in the pulp cleaner equipment is very important. In general, the pulp and paper industry cleaner is cascade connected, and the first part is to remove impurity, and the other to recyle fiber.

Email:paperrecyclemachine@gmail.com
More detail welcome to consult us.

评论

发表评论

此博客中的热门博文

How Paper Machine Run at High Speed?

图片
There are some factors to matter to make sure the paper machine run at high speed. Cleanness Not only the cleanness of workshop environment, but more importantly, the slurry system (especially the paper machine sizing system). There are not allowed to have dirties in auxiliary system equipment, pipeline inwall, press roll and felt. Stability The ratio of slurry, beating quality and pulp consistency should be stable. Only stable slurry can keep the technological parameters of paper machine stable, and the paper machine can run stably. Uniformity The pulp is evenly distributed (the flow of the headbox to the net must be uniform in the transverse direction of the machine) Mesh drying uniform, quantitative uniformity Quantitative uniformity (dry, quantitative, transverse, uniform) Equipment Slurry degassing equipment. The slurry containing large amounts of air is not easy to dehydrate. The pulp is unstable, the speed of the vehicle is restricted, and the quality of the pa...
阅读全文

Press Part Of Paper Machine

图片
Press Part Of Paper Machine The press part is mainly composed of a press roller with different functions and structures。 The paper press felt is used as a paper dewatering medium and a support for transmission, and a subsidiary component, such as a guide roll and a blanket roller, forms a press flow. Press roll can be divided according to the number of rollers and their roles. Paper Machine Press Part Take off the wet paper moisture as much as possible with mechanical press. Increase the dryness of wet paper in the drying section as much as possible, and save the energy consumed by drying. At the same time of dehydration, increase the adhesion of the fiber in the paper, improve the quality of the paper. Transfer wet paper from wire section to dryer. The press dewatering process is also a page transfer process, because of the low strength wet paper state, the main use of blankets as wet paper support, and promote the realization of press dehydration. Email:paperrecycl...
阅读全文